How to Set Up Artwork for Print: Bleed, Crop Marks and Resolution

Published 20 September 2026

Send us a file that isn’t quite print-ready and we’ll fix what we can. But the more your artwork is set up right before it lands with us, the fewer questions we have to ask, and the faster your job goes to press. Here’s what actually matters.

What is bleed, and why does it matter?

Bleed is extra artwork that runs past the edge of where your item gets trimmed. Printers don’t cut with laser precision, there’s always a tiny bit of movement, so if your background colour or image stops exactly at the edge, you risk a thin white sliver showing up after the cut.

The fix: extend your background or edge-to-edge images 3mm past the trim line on every side. That 3mm gets sliced off during trimming, so nothing important should sit in that zone, and nothing important should sit right at the very edge either. Keep text and logos at least 3–5mm inside the trim line too, so nothing looks cramped or gets clipped.

What are crop marks?

Crop marks (sometimes called trim marks) are small lines printed just outside your bleed area that show exactly where the final cut should be. If you’re designing in InDesign, Illustrator or a similar tool, there’s usually a built-in “add bleed and crop marks” option when you export your PDF. If you’re not sure how to add them, don’t worry, send us your file at the right size and we’ll set the marks up on our end.

What resolution should my images be?

For anything printed at full size, 300dpi (dots per inch) is the standard. Anything lower and you’ll start to see soft, blurry, or pixelated edges once it’s printed at full scale, even if it looked sharp on your screen. If you’re working at a reduced scale (say, designing at 50% size to keep the file manageable), keep the resolution at 300dpi at that scale, and make sure everyone involved knows the final size before it goes to print.

CMYK vs RGB: which should I use?

Screens display colour in RGB (red, green, blue) — light mixing together to make colour. Printers use CMYK (cyan, magenta, yellow, black) — ink mixing together on paper. The two don’t produce identical results, and colours that look vivid on screen (especially bright blues, greens and purples) can shift when converted to CMYK for print.

If your design software lets you set the colour mode, choose CMYK from the start rather than converting an RGB file at the last minute. It won’t guarantee a perfect match to your screen, but it avoids the biggest surprises.

Sending your file to us

A print-ready PDF with bleed and crop marks is ideal. But if that’s not something you can produce yourself, send us what you have; PDF, PNG, JPG or an Illustrator (AI) file, and we’ll check it over before anything goes to press. If something needs fixing, we’ll tell you what and why, not just quietly change it.

Got a job coming up? Get a quote or get in touch and we’ll take it from there.

Got a job you need printed?

Send your artwork or tell us what you need. We'll come back with a price.